Dust...

Discuss all aspects of the Scrolls Display/Screen here.

Re: Dust...

Postby brianzion » January 26th, 2011, 8:50 pm

brys snap ‎26 ‎January ‎2011 20h51m44s.png


@ mojo here try this link http://www.animateit.net/data/media/15/47c15.gif
You do not have the required permissions to view the files attached to this post.
Best regards brian.

android 2.1 update 1
linux Kernel: 2.6.29
Firmware: v1.01
Baseband version v1.01

Be as smart as you can, but remember that it is always better to be wise than to be smart.
User avatar
brianzion
Scroll Master
Scroll Master
 
Posts: 308
Joined: January 14th, 2011, 2:03 pm
Location: Milton Keynes

Re: Dust...

Postby mojo » January 26th, 2011, 9:22 pm

haha! thats awesome :) cheers for that :)
'Rooted', 'propped' and 'stripped' -but still scared of terminal F/W V 1.01_Bb V 1.01 K 2.6.29_Android 2.1 32GB & non-Working Market :-/
HTC Desire HD: Rooted, ENG-OFF, S-OFF, IceColdSandwich AKOP 7.4 Stripper edition, O/C@1.5ghz, 16GB Class 10
User avatar
mojo
Scroll Addict
Scroll Addict
 
Posts: 160
Joined: January 24th, 2011, 4:40 pm
Location: In Ur hEad, steelin' uR lOlz

Re: Dust...

Postby BenH » March 13th, 2012, 9:31 am

I sent my scroll excel back because of dust in the screen but after only a week the new one they sent me was starting to do the same, so I opened it up to see if i could clean the dust out and I was pretty successful. getting into the scroll is pretty easy, as you would think, you take out the 2 screws at the base of the unit, then you can pop the back off (be careful as there are wires connecting the motherboard to the speaker). Its very simple inside the excel with there only being 3 major components, the screen, the battery and the motherboard, which is surprisingly small. Unscrew all the screws holding in the screen, and then you will have to unscrew the motherboard, because the last screw for the screen is under it (you may have to remove, or at least just peel back a few bits of tape) gently lift the motherboard, just a little so you can get to that. The WiFi antenna is glued to the case, so very gently peel that off leaving it attached to the back of the screen, you can now lift out the screen and clean away the dust, be careful when lifting out the screen because there is a ribbon cable for the touch screen. Obviously clean the screen in a relatively dust-free environment, and maybe wear a shower cap if you have problems with dandruff. XD
BenH
New Scroller
New Scroller
 
Posts: 1
Joined: March 13th, 2012, 9:05 am

Re: Dust...

Postby brianzion » March 13th, 2012, 10:06 am

my scroll screen has started to peel off now after one year its helped me with the android apk design and experimenting building apps but i wont be buying another. now i use Android Emulator http://goo.gl/1tbE for all my needs. and i am going to get a HTC desire instead of a tablet for portability and compact device i find tablets to big now.
Best regards brian.

android 2.1 update 1
linux Kernel: 2.6.29
Firmware: v1.01
Baseband version v1.01

Be as smart as you can, but remember that it is always better to be wise than to be smart.
User avatar
brianzion
Scroll Master
Scroll Master
 
Posts: 308
Joined: January 14th, 2011, 2:03 pm
Location: Milton Keynes

Previous

Return to Touch Screen

Who is online

Users browsing this forum: No registered users and 1 guest

cron